Plumbing Truck Decals: Logos, Lettering Ideas and Door Layouts

Plumbing truck decals have one job: let a homeowner with a wet ceiling read who you are and how to reach you, usually in the couple of seconds your van is in view. Put the business name first, the phone number second, and the word "plumbing" wherever the name does not already say it. A logo helps people remember you, but it should never push the phone number down to a size nobody can read from the curb.

What a homeowner reads from the curb

The people who look at a plumber's van are neighbors and drivers behind you at a light. Nobody studies the door. They catch a name and maybe seven digits. So the useful items are few:

• The business name, big enough to read across a lawn.
• The phone number, in plain digits with no decorative font.
• The trade, if the name is not obvious (a name like "Marlow & Sons" does not say plumbing).
• The service area, only if you have room for it.

Licensing is a state matter. Check with your state licensing board whether it wants a license number shown on a vehicle, and add it only if it does. Whether a truck needs a USDOT number depends on weight and use, which our guide to who needs a USDOT number walks through.

Plumbing truck lettering ideas for the door

These sample layouts use made-up names and (555) numbers:

• PINEGATE PLUMBING, then (555) 555-0148
• MARLOW & SONS, Plumbing and Drain Service, (555) 555-0112
• HARBOR PIPE CO., Repairs, Water Heaters, Drains, (555) 555-0175

The first suits a small door: two lines, nothing to read twice. The third packs in a services list, which only works on a wide door. To see your own text on a truck door before ordering, use the door builder, which shows a live preview. The door size guide helps you judge widths.

Choosing between two plumbing truck logo designs

Both logo designs below pair a wrench and water drop with your name, and you see a proof of your company name before anything is printed.

The Wrench and Drop Plumbing Logo puts a crossed wrench and drop beside blue capitals on two lines. The strokes are light and the layout is wide, so it suits a van with a long, flat door or a cargo panel where width is not a problem.

The Round Pipe Wrench Badge Logo is a round blue badge with the wrench and drop in white, next to bold navy capitals stacked on three lines. It is heavier and taller, and a short company name fills the lettering well. A name with four or five words will shrink on three lines, so test it in the proof.

A rough rule: a long name leans toward the wide, light layout, and a short name toward the bold badge.

When name and phone is the simpler choice

If you run one van and want it lettered quickly, the Business Name + Phone Number decal carries exactly what a homeowner needs. It also suits a second truck, or a trailer, where a full logo adds little. For a custom mix of lines, such as name, trade, phone and area, the Make-Your-Own 5-Line decal gives you five free-text lines.

Contrast on a white van

Many plumbing vans are white, and dark blue on white is easy to read in daylight. Watch out for pale blue: a light-blue phone number fades from across the street. On a dark van, flip the thinking and keep the lettering light. The fonts and colors guide covers pairings.

Contour cut for a plumbing logo

The optional contour cut adds $10 per door on logo designs. Instead of leaving a rectangle around the artwork, the decal is cut along its outline. On the badge design that gives a clean round edge on the van. Order two for both doors and check the proof for the finished outline. Application steps are in the install guide.

If you also run heating or air work, the HVAC truck decals page covers that side, and electricians have their own layouts and logos.