Masonry Truck Decals: Logo and Lettering Ideas for Brick and Stone Crews

Masonry truck decals get read at a job site, where a homeowner, a general contractor or a supplier's driver glances at the pickup beside the scaffold and wants a name and a number. Make the business name large, put the phone number where a person on the sidewalk can read it, and add a few trade words such as brick, block and stone. A logo shaped like a wall lets people place the trade before they read a single letter.

What the door needs to say

• Business name. Use the one on your invoices, so nobody wonders whose truck it is.
• Phone number with area code. It is the one item a passer-by can act on right away.
• Trade words. "Brick, Block and Stone" is clearer than "Masonry" alone. Print only work you really do, because tuckpointing, retaining walls, chimneys and veneer are separate jobs.
• Service area. One city or county name tells a homeowner you work nearby.
• License number. Check with your state licensing board whether it wants a number shown on a vehicle, and add one only if it does.

The brick-and-stone logo

The Stone and Brick Masonry Logo sets two stacks of blocks side by side, charcoal on the left and red brick on the right, staggered like a real wall. The company name sits under them in heavy, condensed charcoal capitals on two lines. Tall narrow letters suit a long family name, but they shrink as the name grows, so judge the size on the proof.

The design is $120 per door. Your name is fitted to it, and you approve a proof before anything is printed. It carries your name and the mark, so if you want the phone number on the door too, pair it with a second decal.

Three sample layouts

These names and numbers are made up.

1. Crew pickup, plain text: RIDGEWAY BRICK & STONE / Brick, Block and Stone Work / Serving Anytown County / (555) 555-0134
2. Owner's truck, short: HARGROVE MASONRY / Chimneys and Stone Veneer / (555) 555-0171
3. Flatbed, name and number only: KOWALSKI BLOCK CO. / (555) 555-0188

Fewer lines mean bigger letters, so the third layout reads from farther away than the first.

Pickups, flatbeds and dump trucks

Masonry crews often run a pickup with a rack and toolbox plus a flatbed or dump truck for pallets of block, sand and stone. Measure the flat part of each door before you pick a width, and use the door size guide to compare. A scaffold or mixer trailer can carry a name-and-phone decal too, if the panel is smooth and flat.

Whether a heavier truck needs a USDOT number depends on weight and use, not on the trade. The questions are laid out in who needs a USDOT number. If you also pour or finish concrete, see concrete truck decals.

Brick dust and the red in the logo

Dust from cutting block and brick settles on doors as a tan-gray film, and mid-tone colors vanish into it first. Charcoal and red read well on a white, silver or light gray truck. The red bricks fade on a red, maroon or orange truck, and the charcoal letters disappear on black. For plain lettering, black on yellow or white and white on black are dependable pairs; the fonts and colors guide goes further.

Simpler options and the contour cut

Not ready for a logo? The Business Name + Phone Number decal is $30.99 per decal and holds a name, one service line and a phone number. The door builder lets you choose lines, width and colors and shows the result on a truck door, and the Make-Your-Own 5-Line decal is $51.

The optional contour cut adds $10 per door on logo designs, so the decal is cut to the shape of the brick blocks and letters instead of a rectangle. It suits a light truck. On a dark one the charcoal would sit on near-black paint, so keep the rectangle. We sell decals, not vehicle wraps, and installation is DIY with a printed instruction sheet and a video link; the install guide has the steps.